First of all, you need to confirm the color of the graphic you want to project, and then confirm the type of GOBO according to the color.
Black and white or monochrome GOBOS are commonly used, the more simple the color is the more prominent it is. There are also full-color GOBO available for purchase. You can choose the most suitable one according to your needs.
Our GB-25 light projector can project a graphic of 33cm in diameter at 1 meter, 66cm at 2 meters, and so on.
It should be noted that the farther the projection distance, the brightness of the light will be reduced by half. If you need to project as far as 50-100 meters, you can purchase our GB-60 GOBO projector.
Another thing to consider is the angle of projection. It is recommended to install within 15 degrees of tilt to ensure the graphic will not be deformed too much. The video shows the degree of deformation of the graphic at different angles.
After we confirm GOBO and the projection location, we also need to verify whether the machine will be used indoors or outdoors. In principle, it makes little sense to buy a waterproof GOBO projector. If it rains heavily, water will still leak in through the waterproof silicone ring.
The best way to prolong the life of the lamp is to set it up under the roof to avoid direct contact with rain.
Built with Mobirise website template